From: Wolfgang Denk Date: Tue, 21 Dec 2010 16:10:56 +0100 Subject: [U-Boot] Porting Questions - was: [PATCH v2] microblaze: Disabling interrupt should return 1 if was enabled In-Reply-To: <7eb125f4.fad0.12d0964185c.Coremail.henrybenyu@163.com> References: <7eb125f4.fad0.12d0964185c.Coremail.henrybenyu@163.com> Message-ID: <20101221151056.2BE65126EB19@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear =?GBK?B?09q74Q==?=, Please do not hijack existing mail threads!! Start a new thread, and make sure to chose a proper subject. Please make sure to use a line length of 70 characters or so. And never post HTML to that list. In message <7eb125f4.fad0.12d0964185c.Coremail.henrybenyu@163.com> you wrote: > > > 1). First, I am useing JTAG to download image to SDRAM, base address 0x40000000, (32M) so I confused with > "CONFIG_SYS_TEXT_BASE", I think this this the relocate address, I am right? Could you please help > me choose a address for me can working. (I choose 0x41F00000, at last crash on relocate: copy_loop) No, CONFIG_SYS_TEXT_BASE is NOT the relocation address. The relocation address gets dynamically computed and may vary. CONFIG_SYS_TEXT_BASE is the base address of the text segment when linking the U-Boot image. > 2). Second, CONFIG_SYS_INIT_SP_ADDR address is also obscure, I choose 0x42000000, at last crash on relocate: copy_loop) As the name attempts to suggest, CONFIG_SYS_INIT_SP_ADDR defines the address of the initial steck pointer in the restricted C runtime environment before relocation. > 3). What other thing I should do? Read the documentation and especially existing code for other, similar boards. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Microsoft Multitasking: several applications can crash at the same time.