From: Marcel Date: Sun, 26 Dec 2010 13:28:20 +0100 Subject: [U-Boot] {Spam?} u-boot relocation Message-ID: <201012261328.20478.korgull@home.nl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I updated my u-boot-usb to continue my work on the SAM9 USB parts, but got stuck with the following issue : There seems to be a new relocation scheme. I also added some stuff to make it detect the SDRAM, but than I get stuck. int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); dram_init_banksize(); return 0; } Booting looks like this : U-Boot 2010.12-09749-g8da60f4-dirty (Dec 25 2010 - 18:44:18) U-Boot code: 73F00000 -> 73F3F6F4 BSS: -> 73F51A8C monitor len: 00051A8C ramsize: 08000000 TLB table at: 77ff0000 Top of RAM usable for U-Boot at: 77ff0000 Reserving 326k for U-Boot at: 77f9e000 Reserving 384k for malloc() at: 77f3e000 Reserving 24 Bytes for Board Info at: 77f3dfe8 Reserving 144 Bytes for Global Data at: 77f3df58 New Stack Pointer is: 77f3df50 RAM Configuration: Bank #0: 70000000 128 MiB relocation Offset is: 0409e000 Here it stopsand although I have been reading the relocation readme, it doesn't give me any clues where to look for. My board has 1M NOR flash which holds u-boot. I read something in the readme about it, which makes me believe I need some additional things. Does anyone have an idea what I can do to get this to boot again ? Best regards, Marcel