From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Thu, 30 Dec 2010 12:05:06 +0100 Subject: [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses In-Reply-To: <20101230110026.GA30513@shlinux1.ap.freescale.net> References: <1293684968-7338-1-git-send-email-richard.zhao@freescale.com> <20101230093127.GO14221@pengutronix.de> <20101230110026.GA30513@shlinux1.ap.freescale.net> Message-ID: <20101230110506.GY14221@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello Richard, On Thu, Dec 30, 2010 at 07:00:26PM +0800, Richard Zhao wrote: > On Thu, Dec 30, 2010 at 10:31:27AM +0100, Uwe Kleine-K?nig wrote: > > On Thu, Dec 30, 2010 at 12:56:02PM +0800, Richard Zhao wrote: > > > Signed-off-by: Richard Zhao > > > --- > > > Because common clock is changing, I don't send out mx50 clock code. > > > But sure I tested the patch series using the clock code. > > > > > > arch/arm/mach-mx5/Makefile.boot | 6 +++--- > > > 1 files changed, 3 insertions(+), 3 deletions(-) > > > > > > diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot > > > index 9939a19..fec7cd9 100644 > > > --- a/arch/arm/mach-mx5/Makefile.boot > > > +++ b/arch/arm/mach-mx5/Makefile.boot > > > @@ -1,3 +1,3 @@ > > > - zreladdr-y := 0x90008000 > > > -params_phys-y := 0x90000100 > > > -initrd_phys-y := 0x90800000 > > > + zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000 > > > +params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 > > > +initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 > > looks good > > > > Acked-by: Uwe Kleine-K?nig > Thanks. > For such patch acked, do I need to re-send it out when I send out v4 version > of the patch series? As I'm not the imx-maintainer, I'd say yes, send it out (with my ack added) in v4. Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |