From: Christian Lamparter Date: Fri, 7 Jan 2011 02:04:59 +0100 Subject: [ath9k-devel] [PATCH 1/3] ath9k: Decrease skb size to fit into one page. In-Reply-To: <1294361165-15308-1-git-send-email-greearb@candelatech.com> References: <1294361165-15308-1-git-send-email-greearb@candelatech.com> Message-ID: <201101070205.00886.chunkeey@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On Friday 07 January 2011 01:46:03 greearb at candelatech.com wrote: > From: Ben Greear > > Patch is from Eric Dumazet, as described here: > https://patchwork.kernel.org/patch/104271/ > > Reported-by: Michael Guntsche > Signed-off-by: Eric Dumazet > Signed-off-by: Ben Greear > --- > > NOTE: This needs review by ath9k and/or other informed > people. Does the hardware support vector-i/o for rx (like for instance iwlagn)? Else, this change would break A-MSDU rx - which is a mandatory feature (although, not very popular) of 802.11n - See for example 802.11n-2009 9.7c: "Support for the reception of an A-MSDU, where [...], is mandatory for an HT STA" And 7.1.2 "The maximum frame body size is determined by the maximum MSDU size (2304 octets) OR the maximum A-MSDU (3839 or 7935 octets, depending upon the STA's capability), plus any overhead from security encapsulation. > diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c > index b2497b8..270661d 100644 > --- a/drivers/net/wireless/ath/ath9k/recv.c > +++ b/drivers/net/wireless/ath/ath9k/recv.c > @@ -230,11 +230,11 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) > int error = 0, i; > u32 size; > > - > - common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN + > - ah->caps.rx_status_len, > - min(common->cachelsz, (u16)64)); > - > + size = roundup(IEEE80211_MAX_MPDU_LEN + ah->caps.rx_status_len, > + min(common->cachelsz, (u16)64)); > + common->rx_bufsize = max_t(u32, size, > + SKB_MAX_ORDER(NET_SKB_PAD > + + common->cachelsz, 0)); > ath9k_hw_set_rx_bufsize(ah, common->rx_bufsize - > ah->caps.rx_status_len); > >