From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Thu, 13 Jan 2011 15:50:47 +0100 Subject: [PATCH v4 09/10] ARM: mx28: read fec mac address from ocotp In-Reply-To: <1294297998-26930-10-git-send-email-shawn.guo@freescale.com> References: <1294297998-26930-1-git-send-email-shawn.guo@freescale.com> <1294297998-26930-10-git-send-email-shawn.guo@freescale.com> Message-ID: <20110113145047.GU24920@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello Shawn, $SUBJECT ~= s,mx28,mxs/mx28evk, please On Thu, Jan 06, 2011 at 03:13:17PM +0800, Shawn Guo wrote: > Read fec mac address from ocotp and save it into fec_platform_data > mac field for fec driver to use. > > Signed-off-by: Shawn Guo > --- > Changes for v2: > - It's not necessary to remove "const" for fec_platform_data from > platform-fec.c and devices-common.h, so add it back. > - Hard-coding Freescale OUI (00:04:9f) instead of just the first > two two octets. > - Correct the return of mx28evk_fec_get_mac() and check it > with caller > > arch/arm/mach-mxs/mach-mx28evk.c | 32 ++++++++++++++++++++++++++++++++ > 1 files changed, 32 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c > index def6519..54fa512 100644 > --- a/arch/arm/mach-mxs/mach-mx28evk.c > +++ b/arch/arm/mach-mxs/mach-mx28evk.c > @@ -129,12 +129,44 @@ static struct fec_platform_data mx28_fec_pdata[] = { > }, > }; > > +static int __init mx28evk_fec_get_mac(void) > +{ > + int i, ret; > + u32 val; > + > + /* > + * OCOTP only stores the last 4 octets for each mac address, > + * so hard-code Freescale OUI (00:04:9f) here. > + */ > + for (i = 0; i < 2; i++) { > + ret = mxs_read_ocotp(0x20 + i * 0x10, 1, &val); > + if (ret) > + goto error; > + > + mx28_fec_pdata[i].mac[0] = 0x00; > + mx28_fec_pdata[i].mac[1] = 0x04; > + mx28_fec_pdata[i].mac[2] = 0x9f; > + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; > + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; > + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; > + } > + > + return 0; > + > +error: > + pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); > + return ret; > +} > + > static void __init mx28evk_init(void) > { > mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); > > mx28_add_duart(); > > + if (mx28evk_fec_get_mac()) > + pr_warn("%s: failed on fec mac setup\n", __func__); > + > mx28evk_fec_reset(); > mx28_add_fec(0, &mx28_fec_pdata[0]); > #ifdef CONFIG_FEC2 > -- > 1.7.1 > > > -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |