From: "John J. Stimson-III" Subject: QM57/i7: i915 DRI kernel driver causes crash Date: Wed, 19 Jan 2011 13:32:50 -0800 Message-ID: <20110119213250.GC2883@harlie.idsfa.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from carrera.macnugget.org (carrera.macnugget.org [72.251.195.236]) by gabe.freedesktop.org (Postfix) with ESMTP id AD1A19E74D for ; Wed, 19 Jan 2011 13:39:08 -0800 (PST) Received: from harlie.idsfa.net (static-96-229-223-7.lsanca.fios.verizon.net [96.229.223.7]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by carrera.macnugget.org (Postfix) with ESMTPS id D6E614AD38 for ; Wed, 19 Jan 2011 15:32:52 -0600 (CST) Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org Cc: "John J. Stimson-III" List-Id: intel-gfx@lists.freedesktop.org My hardware: motherboard: ITOX CP330-NRM (QM57 chipset) CPU: Intel i7-620m video display: VGA monitor connected to VGA port on motherboard Kernel version 2.6.37. A kernel compiled with AGP support with Intel AGP driver, and DRI support enabled with no drivers, boots. X will not run with device driver set to intel ("no mode switching driver found"), but it will run with the driver set to vesa. A kernel compiled with AGP support for Intel, and DRI support with the Intel i915 driver with modeswitching enabled, crashes immediately after LILO: I select the kernel to boot, there is a message about BIOS checking, the screen blanks for an instant, and then the tail end of kernel crash debugging information is displayed, with numerous references to i915. A kernel compiled with AGP support for Intel, and DRI support with the Intel i915 and i830 drivers compiled as modules, boots just fine. However, running modprobe i915 produces a series of kernel error announcments. After a fresh reboot, running startx with the intel Xwindows driver, without attempting to load the i915 module manually, results in a blank screen and an unkillable X process. Is the QM57 chipset with the i7 mobile processor supported by the Intel DRI kernel drivers? Is this a known problem? What additional information do you need from me to help diagnose this problem? -- john@idsfa.net John Stimson http://www.idsfa.net/~john/ HMC Physics '94