Received: from host4.kei.pl ([94.152.8.4] helo=smtp.host4.kei.pl) by linuxtogo.org with esmtp (Exim 4.72) (envelope-from ) id 1Pi4za-0006IO-Dr for openembedded-devel@lists.openembedded.org; Wed, 26 Jan 2011 14:00:58 +0100 Received: (qmail 521 invoked by uid 2404007); 26 Jan 2011 13:00:11 -0000 X-clamdmail: clamdmail 0.18a Received: from 89-73-120-20.dynamic.chello.pl (HELO home.localnet) (marcin@juszkiewicz.com.pl@89.73.120.20) by host4.kei.pl with ESMTPA; 26 Jan 2011 13:00:11 -0000 From: Marcin Juszkiewicz To: openembedded-devel@lists.openembedded.org Date: Wed, 26 Jan 2011 14:01:01 +0100 User-Agent: KMail/1.13.5 (Linux/2.6.37-12-generic; KDE/4.6.0; x86_64; ; ) References: <4D3FEC09.5070306@atmel.com> In-Reply-To: <4D3FEC09.5070306@atmel.com> MIME-Version: 1.0 Message-Id: <201101261401.02414.marcin@juszkiewicz.com.pl> Subject: Re: Problem with calibration of AT91SAM9M10EKES X-BeenThere: openembedded-devel@lists.openembedded.org X-Mailman-Version: 2.1.11 Precedence: list Reply-To: openembedded-devel@lists.openembedded.org List-Id: Using the OpenEmbedded metadata to build Distributions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Jan 2011 13:00:58 -0000 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Dnia =C5=9Broda, 26 stycznia 2011 o 10:40:25 Ulf Samuelsson napisa=C5=82(a): > I have some calibration problem with my private branch > (ulf/linux-2.6.30-2011-01-??) when building the at91sam9m10ekes board. >=20 > I am running /usr/bin/run-calibrate.sh, > but regardless of how I click, during calibration, > a tap afterwards always results in detection 3 mm above the tap. >=20 > There is a "pointercal" file generated. > It appears to me that this is ignored... > I can tap 1 cm above or below during calibration, > and still the detected tap is 3 mm above the actual tap. =20 > Anything else to think about? > I enclose /etc/X11/xorg.conf and /etc/ts.conf. You are using full X11 with evdev driver so tslib is not used at all. You h= ave=20 to use xinput-calibrator. Regards,=20 =2D-=20 JID: hrw@jabber.org Website: http://marcin.juszkiewicz.com.pl/ LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz