From: Aaron Williams Date: Sat, 12 Feb 2011 03:23:59 -0800 Subject: [U-Boot] in/out_le32, etc. Message-ID: <201102120323.59395.Aaron.Williams@caviumnetworks.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de One thing that is getting confusing to me is that there seems to be many different methods for doing I/O. There's in_xxx/out_xxx, __raw_readx/__raw_writex and readx/writex. What exactly is the difference between all of these? It looks like the in/out was added recently and is not present in the mips io.h file. In a related case, I run into problems with a number of drivers because they assume that readl/writel can be used to access the PCI BAR address space or that a pointer is a physical address. This is not always the case. For example, on our platform the PCI BAR address space is mapped to different 64-bit address spaces depending on the bus number. It would be very helpful if different macros were used for different I/O devices. For example, one set of macros for accessing PCI BAR address space. -Aaron