From: roiman@rambler.ru Subject: X-Fi Surround 5.1 USB Remote Control LIRC config file Date: Sun, 15 May 2011 18:36:39 +0600 Message-ID: <20110515183639.21bbc405@amilo> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mailc.rambler.ru (mailc.rambler.ru [81.19.66.27]) by alsa0.perex.cz (Postfix) with ESMTP id 72BEC10380A for ; Sun, 15 May 2011 14:41:49 +0200 (CEST) Received: from amilo (unknown [95.78.131.5]) (Authenticated sender: roiman@rambler.ru) by mailc.rambler.ru (Postfix) with ESMTP id 81D7D2C34B8 for ; Sun, 15 May 2011 16:41:48 +0400 (MSD) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hi, all. Here is content of LIRC config file lircd.conf with IR-codes for X-Fi Surround 5.1 USB remote control. All buttons (include volume knob) works fine with Alsa driver 1.0.24 and LIRC 0.9.0. Wiki-page (http://alsa.opensrc.org/Usb-audio#Creative_USB_X-Fi_Surround_5.1) for this card presents information about button codes only for volume knob on this card. Because of this information may be useful, I think. Thanks, guys, for your work. Roman. ----------------------------------------------- ----------------------------------------------- begin remote name X-F.Surround-5.1.Remote.Control bits 8 gap 300000 begin codes knob-mute 0x0d knob-vol- 0x0f knob-vol+ 0x10 power 0x29 mute 0x2a vol+ 0x2b vol- 0x2c menu-back 0x2d display 0x2e play-pause 0x2f ok 0x30 up 0x31 down 0x32 prev 0x33 next 0x34 cmss3d-on 0x37 cmss3d-off 0x38 cryst-on 0x39 cryst-off 0x3a shuffle 0x3b repeat 0x3c end codes end remote ----------------------------------------------- -----------------------------------------------