From: Daniel Kuehn Date: Thu, 17 Nov 2011 21:56:31 +0100 Subject: [ath9k-devel] [PATCH] Seeing as alot of ath9k devices is PCI/PCIe or their mini equivalent it makes sense to set ATH9K_PCI to y by default In-Reply-To: <4EC5562B.4050001@openwrt.org> References: <20111109235757.79821a20@Artemis> <4EC524B1.2070200@openwrt.org> <20111117163947.1749dfb1@Artemis> <4EC5562B.4050001@openwrt.org> Message-ID: <20111117215631.2c2064b1@Artemis> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On Thu, 17 Nov 2011 19:44:59 +0100 Gabor Juhos wrote: > 2011.11.17. 16:39 keltez?ssel, Daniel Kuehn ?rta: > > > I agree with you there if it was removed before, maybe then only the help > > section of ath9k should be changed to say that you have to enable either > > PCI/PCIe or AHB support for it to work? > > Yes, adding a comment there would make sense, although that does not prevent > to build ath9k without bus support. Yeah, that is the initial problem I found that I wanted to try and patch, but seeing as it only stands between either always enabling it, or forcing one or the other bus always on if you choose ath9k I don't know what else could be done except note in the help that you also need to enable bus support. I haven't poked around that much with Kconfig but it clearly seems like there isn't a way to default select y but make it possible to disable it... So there doesn't seem to be a clear way to automagically include the most common bus support for ath9k. > > -Gabor Kind regards, Daniel Kuehn -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111117/dfc990f7/attachment.pgp