From: Kurt Van Dijck Subject: Re: Softing Firmware on gitorious Date: Thu, 12 Jan 2012 09:25:36 +0100 Message-ID: <20120112082536.GA380@e-circ.dyndns.org> References: <4F0DB66F.50509@hartkopp.net> <4F0DBF90.5050906@pengutronix.de> <4F0DC8BC.4040704@hartkopp.net> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Return-path: Received: from gate.eia.be ([194.78.71.18]:42764 "EHLO mail.eia.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752847Ab2ALIZj (ORCPT ); Thu, 12 Jan 2012 03:25:39 -0500 Content-Disposition: inline In-Reply-To: <4F0DC8BC.4040704@hartkopp.net> Sender: linux-can-owner@vger.kernel.org List-ID: To: Oliver Hartkopp Cc: Marc Kleine-Budde , "linux-can@vger.kernel.org" On Wed, Jan 11, 2012 at 06:37:00PM +0100, Oliver Hartkopp wrote: > On 11.01.2012 17:57, Marc Kleine-Budde wrote: > > > On 01/11/2012 05:18 PM, Oliver Hartkopp wrote: > >> Hello Kurt, > >> > >> i just uploaded the Softing firmware from BerliOS to our new > >> > >> https://gitorious.org/linux-can/can-misc I was thinking to pick this up sooner or later. Thanks for doing this already. > >> > >> git repository. > >> > >> See at > >> > >> https://gitorious.org/linux-can/can-misc/blobs/master/firmware/softing-fw-4.6-binaries.tar.gz > >> > >> Currently the only reference is in the Linux Kernel in the Softing Kconfig: > >> > >> config CAN_SOFTING_CS > >> tristate "Softing Gmbh CAN pcmcia cards" > >> depends on PCMCIA > >> depends on CAN_SOFTING > >> ---help--- > >> Support for PCMCIA cards from Softing Gmbh & some cards > >> from Vector Gmbh. > >> You need firmware for these, which you can get at > >> http://developer.berlios.de/projects/socketcan/ > >> This version of the driver is written against > >> firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) > >> In order to use the card as CAN device, you need the Softing generic > >> support too. > >> > >> > >> The question is now: > >> > >> 1. change the link in the Kconfig Yes > >> 2. Add the PCMCIA firmware to the Linux Kernel (linux/firmware/*.ihex) If I read the READMEs well, new firmware should go into a seperate repo? Am I wrong? I admit that putting the firmware into linux/firmware/*.ihex would solve a distribution problem ... > >> 3. 1 & 2 > > > > 3. > > > > It would be nice to have a license statement on that files. As these are > > in binary form, the driver would be removed from the debian kernel. > > What's the official source of that firmware? Do we have a contact to > > softing? The official source is softing. I only repackaged the firmware from 'unsigned char ...[]' in header files towards seperate blobs to be used with the firmware interface. > > > > > Yes. See here: > > https://lists.berlios.de/pipermail/socketcan-core/2008-June/001613.html This convinces me as a developer that they have not problem. > > I'll check the mentioned driver packages for license information which i don't > have on my current machine here. I'll look too. > > Regards, > Oliver Kurt