From: arnd@arndb.de (Arnd Bergmann) Date: Thu, 16 Aug 2012 13:56:38 +0000 Subject: [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree In-Reply-To: <1345119373-22774-1-git-send-email-linus.walleij@linaro.org> References: <1345119373-22774-1-git-send-email-linus.walleij@linaro.org> Message-ID: <201208161356.38997.arnd@arndb.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thursday 16 August 2012, Linus Walleij wrote: > + fpga { > + compatible = "arm,amba-bus", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + rtc: rtc at 15000000 { > + compatible = "arm,pl031", "arm,primecell"; > + reg = <0x15000000 0x1000>; > + interrupt-parent = <&pic>; > + interrupts = <8>; > + arm,primecell-periphid = <0x00041030>; > + }; > + > + uart0: uart at 16000000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x16000000 0x1000>; > + interrupt-parent = <&pic>; > + interrupts = <1>; > + arm,primecell-periphid = <0x00041010>; > + }; > + > + uart1: uart at 17000000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x17000000 0x1000>; > + interrupt-parent = <&pic>; > + interrupts = <2>; > + arm,primecell-periphid = <0x00041010>; > + }; When all devices set the same interrupt-parent, you can just as well move that property to the fpga node. Arnd