From: Luka Perkov Date: Sun, 25 Nov 2012 18:02:04 +0100 Subject: [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support In-Reply-To: <1353859377.28559.44.camel@home.hno.se> References: <1353843412.17518.12.camel@home.hno.se> <20121125152133-9180@mutt-kz> <1353859377.28559.44.camel@home.hno.se> Message-ID: <20121125170204-27745@mutt-kz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Nov 25, 2012 at 05:02:57PM +0100, Henrik Nordstr?m wrote: > Thanks for your patch reviews. Will fix up your comments and submit a > new batch of patches later tonight. You might want to wait a few days... Somebody else might have comments. > s?n 2012-11-25 klockan 16:21 +0100 skrev Luka Perkov: > > > I think you should add README file in doc directory. It should at least > > contain information how to add support for new boards and point to the > > tool used for generating images. > > There have long been thougts about moving the SPL DRAM controller > parameters to a boot header added by mksunxiboot instead of wiring them > into the source. > > Which tool for generating images? mksunxiboot? The SPL image is built > automatically. Ah ok, I missed that. So the generated SPL image just needs to be copied on the card ? If yes please put that into README in doc directory. > But yes, a README explaining how to install the SPL would help. We do > have a bit of a such README but I see now that it's slightly misplaced > as tools/mksunxiboot.README, should move do doc/README.sunxi and > expanded a bit. We should have a short tools/mksunxiboot.README too, so don't delete that one. > > Do you have any plans for adding support so the boards can boot from > > SPI/NAND/NOR, anything else then MMC/SD ? > > NAND is coming once we get the NAND controller under reasonable control. > It's a little too smart controller to fit nicely in mtd, and not exactly > well documented. Plus that many boards are using NAND chips not > recognised by u-boot mtd code. Ok. Booting from NAND is something I would like to have ;) > Support for booting from MMC2 is also coming. > > There is no known boards using SPI boot media so this probably will not > get added in the near future. > > NOR is not supported by the SoC other than in SPI package. Ok. Thanks for the information. Luka