From: paul@pwsan.com (Paul Walmsley) Date: Sun, 30 Dec 2012 11:28:26 -0700 Subject: [PATCH 0/3] ARM: OMAP2+: PM/hwmod: clean up some WFI-related code Message-ID: <20121230182745.30526.47072.stgit@dusk.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series implements a hwmod flag that can be set on OMAP IP blocks to indicate that the MPU should not be allowed to enter WFI when the IP blocks are active. It also drops what appears to be unnecessary SRAM code used by the OMAP2xxx PM code, using an inline WFI instead. - Paul --- Paul Walmsley (3): ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active arch/arm/mach-omap2/omap_hwmod.c | 8 ++++++++ arch/arm/mach-omap2/omap_hwmod.h | 9 +++++++++ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 7 ++++++- arch/arm/mach-omap2/pm24xx.c | 22 +++------------------- arch/arm/mach-omap2/sleep24xx.S | 19 ------------------- 5 files changed, 26 insertions(+), 39 deletions(-)