From: Tom Rini Date: Fri, 25 Jan 2013 17:11:13 -0500 Subject: [U-Boot] [PATCH v2 2/3] pcm051: Add support for Phytec phyCORE-AM335x In-Reply-To: <1357901612-9717-2-git-send-email-larsi@wh2.tu-dresden.de> References: <1357901612-9717-1-git-send-email-larsi@wh2.tu-dresden.de> <1357901612-9717-2-git-send-email-larsi@wh2.tu-dresden.de> Message-ID: <20130125221113.GC30402@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 11, 2013 at 11:53:31AM +0100, Lars Poeschel wrote: > From: Lars Poeschel > > The board is named pcm051 and has this hardware: > SOC: TI AM3359 > DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB > ETH 1: LAN8710AI > SPI-Flash: W25Q64BVSSIG > RTC: RV-4162-C7 > I2C-EEPROM: CAT32WC32 > NAND: MT29F4G08_VFPGA63 > PMIC: TPS65910A3 > LCD > > Supported: > UART 1 > MMC/SD > ETH 1 > USB > I2C > SPI > > Not yet supported: > NAND > RTC > LCD > > Signed-off-by: Lars Poeschel With the following added (due to another patch I pulled in) diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 2096fcf..aa90ba9 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -295,6 +295,7 @@ #define CONFIG_NET_MULTI #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_SMSC #endif /* ! __CONFIG_PCM051_H */ Applied to u-boot-ti/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: