From: Lars Poeschel Subject: Re: [PATCH RFC] misc/at24: distinguish between eeprom and fram chips Date: Mon, 28 Jan 2013 11:40:15 +0100 Message-ID: <201301281140.15289.poeschel@lemonage.de> References: <201212041758.38600.poeschel@lemonage.de> <201212071114.29034.poeschel@lemonage.de> <20130124072701.GG8364@nekote.pengutronix.de> Mime-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20130124072701.GG8364@nekote.pengutronix.de> Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org List-Id: linux-i2c@vger.kernel.org On Thursday 24 January 2013 at 08:27:01, Wolfram Sang wrote: > > > > > > I wanted to use a fm24c04 i2c fram chip with linux. I grepped > > > > > > the source and found nothing. I later found that my chip can be > > > > > > handled by at24 eeprom driver. It creates a sysfs file called > > > > > > eeprom to read from and write to the chip. Userspace has no > > > > > > chance to distinguish if it is writing an eeprom or a fram > > > > > > chip. > > > > > > > > > > Why should it? > > > > > > > > Because writes are much faster and it doesn't have to take care on > > > > erase cycles. It could use other write strategies on such devices > > > > and update informations that have to survive power downs more > > > > often. > > > > > > I agree. I think that a seperate attribute named e.g. 'page_size' > > > would be more helpful than renaming the binary file to fram? > > > > Yes, this is a much better solution! Adding a seperate sysfs file > > page_size and a file for the type of device which would read eeprom, > > fram, etc then. If you also think this is the way to go, I would spent > > one of my next free timeslots to this. > > Oops, this mail seems to have dropped off :( Luckily I did not have a free timeslot to invest yet. ;) > I am all for the 'page_size' attribute, but still not convinced what > gain the 'type' attribute would allow. For FRAM, the page size will be > large. Isn't this enough information? Yes, this would be enough information and I think this is the way we should go. I set this on my todo list. Although the change will be quite simple, I think I will not find the time to hit the upcoming merge window. Lars