From: Wolfgang Denk Date: Fri, 01 Feb 2013 06:25:40 +0100 Subject: [U-Boot] call env print from uboot environment In-Reply-To: References: <1359663873.7974.308.camel@genx> <20130131222946.CA552200276@gemini.denx.de> Message-ID: <20130201052540.B468620055E@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Rommel Custodio, In message you wrote: > Dear Wolfgang, > > Wolfgang Denk denx.de> writes: > > > > > > What am I doing wrong. > > > > Try instead: > > > > env import -b 20000005 > Skipping the CRC ... maybe "20000004" is the correct address. No. As I mentioned before, this environment was set up for redundant env, and has a flag byte after the CRC. So you must start at offset 5. > "env import -c 0x20000000 0x200" if you want the CRC verified. Which will not work, as there is no valid CRC in his environment. You should actually read what I wrote before trying to correct me. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A good marriage would be between a blind wife and deaf husband. -- Michel de Montaigne