From: Thierry Reding Date: Thu, 14 Feb 2013 08:18:38 +0100 Subject: [U-Boot] [PATCH v3 2/3] Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux In-Reply-To: <1360791890-6644-3-git-send-email-twarren@nvidia.com> References: <1360791890-6644-1-git-send-email-twarren@nvidia.com> <1360791890-6644-3-git-send-email-twarren@nvidia.com> Message-ID: <20130214071838.GA14428@avionic-0098.mockup.avionic-design.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Feb 13, 2013 at 02:44:49PM -0700, Tom Warren wrote: > Tamonten boards (medcom-wide, plutux, and tec) use a different/new > dtsi file w/common settings. > > Signed-off-by: Tom Warren > Acked-by: Thierry Reding > --- > v3: new > > board/avionic-design/dts/tegra20-tamonten.dtsi | 489 ++++++++++++++++++++++++ > 1 files changed, 489 insertions(+), 0 deletions(-) > create mode 100644 board/avionic-design/dts/tegra20-tamonten.dtsi > > diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi > new file mode 100644 > index 0000000..4766aba > --- /dev/null > +++ b/board/avionic-design/dts/tegra20-tamonten.dtsi > @@ -0,0 +1,489 @@ > +/include/ "tegra20.dtsi" It's a bit unfortunate that this can't use ARCH_CPU_DTS anymore because it isn't run through the preprocessor. With the Tegra30 Tamonten coming up I thought it might have been nice to share some parts of it, but given the amount of changes between Tegra20 and Tegra30 Tamonten I don't think that will be much of an option anyway. So this is fine with me. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: not available URL: