From: horms@verge.net.au (Simon Horman) Date: Mon, 18 Feb 2013 10:23:22 +0900 Subject: [PATCH 0/4] R-Car SATA driver and platform data In-Reply-To: <201302170135.28336.sergei.shtylyov@cogentembedded.com> References: <201302170135.28336.sergei.shtylyov@cogentembedded.com> Message-ID: <20130218012322.GA11807@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Feb 17, 2013 at 01:35:27AM +0300, Sergei Shtylyov wrote: > Hello. > > Here's the set of 4 patches against the Simon Horman's renesas.git repo, 'next' branch: > > [1/4] ARM: mach-shmobile: r8a7779: SATA DT configuration > [2/4] ARM: mach-shmobile: r8a7779: add SATA support > [3/4] libata: add R-Car SATA driver > [4/4] ARM: mach-shmobile: marzen: add SATA support > > Patch 3 also applies to the 'upstream' branch of Jeff Garzik's libata-dev.git repo. Hi Sergei, Hi All, I do not expect patch 3 of this series to got through the renesas tree, however, I have included it and the other three patches in this series to a topic branch in the renesas tree, topic/r-car-stat. The base of the topic branch is: * a merge of renesas.git next and libata-dev.git upstream, and; * a boot fix for Marzen which I plan to add to next once it is reviewed: "ARM: shmobile: r8a7779: Correct TMU clock support again" (v3). With this in place I built a kernel using the marzen_defconfig and booted it. However, I wonder if I am missing a kernel option, or perhaps something else of a minor nature as I see the following: # dmesg | grep sata sata_rcar sata_rcar: coherent DMA mask is unset sata_rcar sata_rcar: failed to start port 0 (errno=-12) sata_rcar: probe of sata_rcar failed with error -12