From: Wolfgang Denk Date: Sun, 10 Mar 2013 08:59:47 +0100 Subject: [U-Boot] =?utf-8?q?=5BPATCH_V2=5D_Add_Boundary_Devices_Nitrogen6X?= =?utf-8?q?_boards?= In-Reply-To: <1362873856-14785-1-git-send-email-eric.nelson@boundarydevices.com> References: <1362873856-14785-1-git-send-email-eric.nelson@boundarydevices.com> Message-ID: <20130310075948.035BA200642@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Eric, In message <1362873856-14785-1-git-send-email-eric.nelson@boundarydevices.com> you wrote: > > +Eric Nelson > + nitrogen6dl i.MX6DL 1GB > + nitrogen6dl2g i.MX6DL 2GB > + nitrogen6q i.MX6Q/6D 1GB > + nitrogen6q2g i.MX6Q/6D 2GB > + nitrogen6s i.MX6S 512MB > + nitrogen6s1g i.MX6S 1GB Why do we need different configurations for example for nitrogen6dl and nitrogen6dl2g? My understanding is that the difference is mainly the RAM size on the boards? In this case it should be possible to configure U-Boot for the maximum possible RAM size (2 GB here?), then have get_ram_size() detect the actual available amount, and then adjust settings as needed. At least this is how U-Boot ius supposed to work. It is a maintenance nightmare if each and every configuration requires a separate U-Boot image. We don't want to have this. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A man is not complete until he is married -- then he is finished.