From: Guenter Roeck Date: Tue, 12 Mar 2013 17:19:53 +0000 Subject: Re: [lm-sensors] [PATCH 5/5] Add support for the Dallas/Maxim DS1705 Message-Id: <20130312171953.GF30269@roeck-us.net> List-Id: References: <20130312155250.611baf07@endymion.delvare> In-Reply-To: <20130312155250.611baf07@endymion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Tue, Mar 12, 2013 at 05:05:59PM +0100, Jean Delvare wrote: > On Tue, 12 Mar 2013 08:49:30 -0700, Guenter Roeck wrote: > > On Tue, Mar 12, 2013 at 03:52:50PM +0100, Jean Delvare wrote: > > > Basically it's the same as the original DS17 but much faster. > > > > > > Signed-off-by: Jean Delvare > > > --- > > > Documentation/hwmon/lm75 | 8 ++++---- > > > drivers/hwmon/Kconfig | 2 +- > > > drivers/hwmon/lm75.c | 7 +++++++ > > > 3 files changed, 12 insertions(+), 5 deletions(-) > > > > > > --- linux-3.9-rc2.orig/Documentation/hwmon/lm75 2013-03-12 15:49:08.893730398 +0100 > > > +++ linux-3.9-rc2/Documentation/hwmon/lm75 2013-03-12 15:51:32.842053514 +0100 > > > @@ -12,11 +12,11 @@ Supported chips: > > > Addresses scanned: I2C 0x48 - 0x4f > > > Datasheet: Publicly available at the National Semiconductor website > > > http://www.national.com/ > > > - * Dallas Semiconductor DS75, DS1775 > > > - Prefixes: 'ds75', 'ds1775' > > > + * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505 > > > > Hi Jean, > > > > Headline says DS1705. Looking into the datasheets, I guess the headline > > is wrong, or I am missing something. > > Doh, yes, typo in the headline _and_ the header comment (DS75 not > DS17.) Not sure how I managed to miss both. Thanks for spotting, will > resend. > > > Otherwise Acked-by: Guenter Roeck > > BTW I'll take all these patches in my own tree if this is OK with you. > Not sure why you took my previous lm75 patch (Update header inclusion) > in yours. > Mostly because you had asked me to handle 3.8. Maybe that was a misunderstanding. Sorry if I stepped on your feet ... want me to drop it ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors