From: Guenter Roeck Date: Thu, 14 Mar 2013 15:14:10 +0000 Subject: Re: [lm-sensors] [PATCH 1/5] hwmon: (w83627ehf) Use fixed attributes for SYSTIN, CPUTIN, and AUXTIN Message-Id: <20130314151410.GA10995@roeck-us.net> List-Id: References: <1363217037-15723-2-git-send-email-linux@roeck-us.net> In-Reply-To: <1363217037-15723-2-git-send-email-linux@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Wed, Mar 13, 2013 at 04:23:53PM -0700, Guenter Roeck wrote: > So far the code used dynamic temperature attributes for SYSTIN, CPUTIN, and > AUXTIN on NCT6775/NCT6776. That has the disadvantage that the mapping of > tempX_type and tempX_offset does not necessarily match reality, and code > complexity is increased. > > To avoid mapping problems and simplify the code, use fixed mapping instead, and > use temp[4-9] for additional temperature sources. > > Signed-off-by: Guenter Roeck Given that we are about to introduce a shiny new driver for NCT6775/NCT6776, and will likely remove support for those chips from the w83627ehf driver, maybe we should not bother and just drop this patch. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors