From: Tom Rini Date: Thu, 21 Mar 2013 07:59:01 -0400 Subject: [U-Boot] [PATCH] ARM: OMAP5: Set fdt_high to enable booting with Device tree In-Reply-To: <1363848917-1106-1-git-send-email-r.sricharan@ti.com> References: <1363848917-1106-1-git-send-email-r.sricharan@ti.com> Message-ID: <20130321115901.GA26945@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Mar 21, 2013 at 12:25:17PM +0530, Sricharan R wrote: > While booting with dtblob, if fdt_high is not set to > 0xffffffff, the dt blob is relocated to a higher address, > which the kernel is not able to use without HIGHMEM. > > So set it to 0xffffffff to avoid the issue. > > Signed-off-by: Sricharan R That's fine, but while we're making this DT-happy, lets add fdtaddr to the env (so there's a good default and safe address to load the DT to) and make the default boot commands load and pass the DT. That means that we need to make sure that you probably need to enable CONFIG_ENV_VARS_UBOOT_CONFIG and perhaps CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG (and see board/ti/am335x/board.c for an example) so that we pick out the right DT file to load. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: