From: andrew@lunn.ch (Andrew Lunn) Date: Mon, 25 Mar 2013 09:47:39 +0100 Subject: [PATCHv2 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa In-Reply-To: <1364077797-21206-5-git-send-email-alex@digriz.org.uk> References: <1364077797-21206-1-git-send-email-alex@digriz.org.uk> <1364077797-21206-5-git-send-email-alex@digriz.org.uk> Message-ID: <20130325084739.GF5627@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Mar 23, 2013 at 10:29:57PM +0000, Alexander Clouter wrote: > The crypto functionality hook in the orion5x dtsi uses an IRQ that clashes > with the Ethernet controller, so lets move it to use the IRQ that the non-DT > code utilises. Hi Alex Move is the wrong word here. The IRQ are hardware assigned, you cannot pick and choose. I would write a comment like: Fix the IRQ number for crypto, which should be 28, not 22 which is actually Ethernet. Andrew > > Signed-off-by: Alexander Clouter > --- > arch/arm/boot/dts/orion5x.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi > index 3944b9b..f4be4c5 100644 > --- a/arch/arm/boot/dts/orion5x.dtsi > +++ b/arch/arm/boot/dts/orion5x.dtsi > @@ -127,7 +127,7 @@ > reg = <0x90000 0x10000>, > <0xf2200000 0x800>; > reg-names = "regs", "sram"; > - interrupts = <22>; > + interrupts = <28>; > status = "okay"; > }; > }; > -- > 1.7.10.4 >