From: andrew@lunn.ch (Andrew Lunn) Date: Mon, 25 Mar 2013 19:33:57 +0100 Subject: [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management In-Reply-To: <1364225229-2857-2-git-send-email-ezequiel.garcia@free-electrons.com> References: <1364225229-2857-1-git-send-email-ezequiel.garcia@free-electrons.com> <1364225229-2857-2-git-send-email-ezequiel.garcia@free-electrons.com> Message-ID: <20130325183357.GB631@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Mar 25, 2013 at 12:27:06PM -0300, Ezequiel Garcia wrote: > This driver supports both Armada 370 and Armada XP SoC > thermal management controllers. > > Armada 370 has a register to check a valid temperature, whereas > Armada XP does not. Each has a different initialization (i.e. calibration) > function. The temperature conversion formula is the same for both. > > The controller present in each SoC have a very similar feature set, > so it corresponds to have one driver to support both of them. > > Although this driver may present similarities to Dove and Kirkwood > thermal driver, the exact differences and coincidences are not fully > known. For this reason, support is given through a separate driver. > > Signed-off-by: Ezequiel Garcia > --- > .../devicetree/bindings/thermal/armada-thermal.txt | 22 ++ > drivers/thermal/Kconfig | 8 + > drivers/thermal/Makefile | 1 + > drivers/thermal/armada_thermal.c | 236 ++++++++++++++++++++ > 4 files changed, 267 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/thermal/armada-thermal.txt > create mode 100644 drivers/thermal/armada_thermal.c > > diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt > new file mode 100644 > index 0000000..fff93d5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt > @@ -0,0 +1,22 @@ > +* Marvell Armada 370/XP thermal management > + > +Required properties: > + > +- compatible: Should be set to one of the following: > + marvell,armada370-thermal > + marvell,armadaxp-thermal > + > +- reg: Device's register space. > + Two entries are expected, see the examples below. > + The first one is required for the sensor register; > + the second one is required for the control register > + to be used for sensor initialization (a.k.a. calibration). > + > +Example: > + > + thermal at d0018300 { > + compatible = "marvell,armada370-thermal"; > + reg = <0xd0018300 0x4 > + 0xd0018304 0x4>; > + status = "okay"; > + }; > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index a764f16..fcd5a27 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -134,6 +134,14 @@ config DOVE_THERMAL > Support for the Dove thermal sensor driver in the Linux thermal > framework. > > +config ARMADA_THERMAL > + tristate "Armada 370/XP thermal management" > + depends on ARCH_MVEBU > + depends on OF > + help > + Enable this option if you want to have support for thermal management > + controller present in Armada 370 and Armada XP SoC. > + Hi Ezequiel For some unknown reason, the Kconfig entries are in reverse alphabetic order. So you should insert this entry after DB8500. Same for the Makefile. Andrew