From: plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD) Date: Mon, 8 Apr 2013 16:07:55 +0200 Subject: [RFC v2 PATCH] at_hdmac: move to generic DMA binding In-Reply-To: <20130408121930.GB6398@ludovic.desroches@atmel.com> References: <1365403409-18381-1-git-send-email-ludovic.desroches@atmel.com> <20130408105515.GU20693@game.jcrosoft.org> <20130408121930.GB6398@ludovic.desroches@atmel.com> Message-ID: <20130408140755.GZ20693@game.jcrosoft.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 14:19 Mon 08 Apr , Ludovic Desroches wrote: > On Mon, Apr 08, 2013 at 12:55:15PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > On 08:43 Mon 08 Apr , ludovic.desroches at atmel.com wrote: > > > From: Ludovic Desroches > > > > > > Signed-off-by: Ludovic Desroches > > > --- > > > > > > Hi, > > > > > > Here is a second try to move at_hdmac to generic DMA binding. I have updated > > > bindings according to Arnd comments ie I have removed chunk transfer size. > > > > > > I have added the implementation but I am not very happy with the translation > > > function. I have tried to not break old stuff: slave ask for a channel giving > > > an atslave structure (passed through pdata) as a parameter for the filter > > > function which saves this structure into chan->private. Then chan->private > > > contains the configuration for the channel CFG register which is done when > > > calling device_alloc_chan_resources. > > > > > > If I allocate the atslave structure in the xlate function, where should be the > > > right place to deallocate it? For the moment, I choose to add the atslave > > > structure to the at_dma_chan structure but I am not happy with writing the > > > channel configuration register into the xlate function. I would like to keep > > > the same path as before. > > so allow with devm_ > > To my mind it's channel related and not controller related. If the channel is > released, will the deallocation be done automatically? when the device is free yes so free on slave device it's ok Best Regards, J. > > > > > > > Regards > > > > > > Ludovic > > > > > > > > > .../devicetree/bindings/dma/atmel-dma.txt | 27 +++++++- > > > arch/arm/boot/dts/sama5d3.dtsi | 2 + > > > drivers/dma/at_hdmac.c | 71 ++++++++++++++++++++-- > > > drivers/dma/at_hdmac_regs.h | 7 +++ > > > 4 files changed, 99 insertions(+), 8 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt > > > index 3c046ee..2d6f0f3 100644 > > > --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt > > > +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt > > > @@ -4,11 +4,34 @@ Required properties: > > > - compatible: Should be "atmel,-dma" > > > - reg: Should contain DMA registers location and length > > > - interrupts: Should contain DMA interrupt > > > +- #dma-cells: Must be <2> > > > > > > -Examples: > > > +Example: > > > > > > -dma at ffffec00 { > > > +dma0: dma at ffffec00 { > > > compatible = "atmel,at91sam9g45-dma"; > > > reg = <0xffffec00 0x200>; > > > interrupts = <21>; > > > + #dma-cells = <2>; > > > +}; > > > + > > > +DMA clients connected to the Atmel DMA controller must use the format > > > +described in the dma.txt file, using a three-cell specifier for each channel. > > > +The three cells in order are: > > > + > > > +1. A phandle pointing to the DMA controller > > > +2. The memory interface (16 most significant bits), the peripheral interface > > > +(16 less significant bits) > > > +3. The peripheral identifier (can be different for tx and rx) > > > + > > > +Example: > > > + > > > +i2c0 at i2c@f8010000 { > > > + compatible = "atmel,at91sam9x5-i2c"; > > > + reg = <0xf8010000 0x100>; > > > + interrupts = <9 4 6>; > > > + dmas = <&dma0 1 7>, > > > + <&dma0 1 8>; > > > + dma-names = "tx", "rx" > > > }; > > > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > > > index 39b0458..9232143 100644 > > > --- a/arch/arm/boot/dts/sama5d3.dtsi > > > +++ b/arch/arm/boot/dts/sama5d3.dtsi > > > @@ -349,6 +349,7 @@ > > > reg = <0xffffe600 0x200>; > > > interrupts = <30 4 0>; > > > #dma-cells = <1>; > > > + #dma-cells = <2>; > > ?? > > > > 2 dma-cells? > > Yes 2 dma-cells, mistake in the patch, the work is still in progress. > > > > }; > > > > > > dma1: dma-controller at ffffe800 { > > > @@ -356,6 +357,7 @@ > > > reg = <0xffffe800 0x200>; > > > interrupts = <31 4 0>; > > > #dma-cells = <1>; > > > + #dma-cells = <2>; > > ditto > > > }; > > > > > > ramc0: ramc at ffffea00 { > > > diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c > > > index 8415467..ec7f561 100644 > > > --- a/drivers/dma/at_hdmac.c > > > +++ b/drivers/dma/at_hdmac.c > > > @@ -24,6 +24,7 @@ > > > #include > > > #include > > > #include > > > +#include > > > > > > #include "at_hdmac_regs.h" > > > #include "dmaengine.h" > > > @@ -676,7 +677,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, > > > ctrlb |= ATC_DST_ADDR_MODE_FIXED > > > | ATC_SRC_ADDR_MODE_INCR > > > | ATC_FC_MEM2PER > > > - | ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF); > > > + | ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if); > > > reg = sconfig->dst_addr; > > > for_each_sg(sgl, sg, sg_len, i) { > > > struct at_desc *desc; > > > @@ -715,7 +716,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, > > > ctrlb |= ATC_DST_ADDR_MODE_INCR > > > | ATC_SRC_ADDR_MODE_FIXED > > > | ATC_FC_PER2MEM > > > - | ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF); > > > + | ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if); > > > > > > reg = sconfig->src_addr; > > > for_each_sg(sgl, sg, sg_len, i) { > > > @@ -821,8 +822,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, > > > desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED > > > | ATC_SRC_ADDR_MODE_INCR > > > | ATC_FC_MEM2PER > > > - | ATC_SIF(AT_DMA_MEM_IF) > > > - | ATC_DIF(AT_DMA_PER_IF); > > > + | ATC_SIF(atchan->mem_if) > > > + | ATC_DIF(atchan->per_if); > > > break; > > > > > > case DMA_DEV_TO_MEM: > > > @@ -832,8 +833,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, > > > desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR > > > | ATC_SRC_ADDR_MODE_FIXED > > > | ATC_FC_PER2MEM > > > - | ATC_SIF(AT_DMA_PER_IF) > > > - | ATC_DIF(AT_DMA_MEM_IF); > > > + | ATC_SIF(atchan->per_if) > > > + | ATC_DIF(atchan->mem_if); > > > break; > > > > > > default: > > > @@ -1189,6 +1190,55 @@ static void atc_free_chan_resources(struct dma_chan *chan) > > > dev_vdbg(chan2dev(chan), "free_chan_resources: done\n"); > > > } > > > > > > +static bool at_dma_filter(struct dma_chan *chan, void *dma_dev) > > > +{ > > > + if (dma_dev == chan->device->dev) > > > + return true; > > > + else > > > + return false; > > > +} > > > + > > > +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec, > > > + struct of_dma *of_dma) > > > +{ > > > + struct dma_chan *chan; > > > + struct at_dma_chan *atchan; > > > + struct at_dma_slave *atslave; > > > + dma_cap_mask_t mask; > > > + unsigned int per_id; > > > + struct platform_device *dmac_pdev; > > > + > > > + if (dma_spec->args_count != 2) > > > + return NULL; > > > + > > > + dmac_pdev = of_find_device_by_node(dma_spec->np); > > > + > > > + dma_cap_zero(mask); > > > + dma_cap_set(DMA_SLAVE, mask); > > > + > > > + chan = dma_request_channel(mask, at_dma_filter, &dmac_pdev->dev); > > > + if (!chan) > > > + return NULL; > > > + > > > + atchan = to_at_dma_chan(chan); > > > + atchan->per_if = dma_spec->args[0] & 0xff; > > > + atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff; > > > + > > > + atslave = &atchan->atslave; > > > + /* > > > + * We can fill both SRC_PER and DST_PER, one of these fields will be > > > + * ignored depending on DMA transfer direction. > > > + */ > > > + per_id = dma_spec->args[1]; > > > + atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW > > > + | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id) > > > + | ATC_SRC_PER(per_id); > > > + atslave->dma_dev = &dmac_pdev->dev; > > > + chan->private = atslave; > > > + channel_writel(atchan, CFG, atslave->cfg); > > > + > > > + return chan; > > > +} > > > > > > /*-- Module Management -----------------------------------------------*/ > > > > > > @@ -1389,6 +1439,15 @@ static int __init at_dma_probe(struct platform_device *pdev) > > > > > > dma_async_device_register(&atdma->dma_common); > > > > > > + if (pdev->dev.of_node) { > > more simple return if NULL > > > + printk("=== of_dma_controller_register ===\n"); > > drop this > > of course, I'll drop it for the submission > > > > + err = of_dma_controller_register(pdev->dev.of_node, > > > + at_dma_xlate, atdma); > > > + if (err && err != -ENODEV) > > > + dev_err(&pdev->dev, > > > + "could not register of_dma_controller\n"); > > if err you need to return err > > ok > > > > + } > > > + > > > return 0; > > > > > > err_pool_create: > > > diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h > > > index 0eb3c13..e3d2f12 100644 > > > --- a/drivers/dma/at_hdmac_regs.h > > > +++ b/drivers/dma/at_hdmac_regs.h > > > @@ -220,6 +220,8 @@ enum atc_status { > > > * @device: parent device > > > * @ch_regs: memory mapped register base > > > * @mask: channel index in a mask > > > + * @per_if: peripheral interface > > > + * @mem_if: memory interface > > > * @status: transmit status information from irq/prep* functions > > > * to tasklet (use atomic operations) > > > * @tasklet: bottom half to finish transaction work > > > @@ -227,6 +229,8 @@ enum atc_status { > > > * @save_dscr: for cyclic operations, preserve next descriptor address in > > > * the cyclic list on suspend/resume cycle > > > * @dma_sconfig: configuration for slave transfers, passed via DMA_SLAVE_CONFIG > > > + * @atslave: hardware configuration for slave transfers which is not passed via > > > + * DMA_SLAVE_CONFIG > > > * @lock: serializes enqueue/dequeue operations to descriptors lists > > > * @active_list: list of descriptors dmaengine is being running on > > > * @queue: list of descriptors ready to be submitted to engine > > > @@ -238,11 +242,14 @@ struct at_dma_chan { > > > struct at_dma *device; > > > void __iomem *ch_regs; > > > u8 mask; > > > + u8 per_if; > > > + u8 mem_if; > > > unsigned long status; > > > struct tasklet_struct tasklet; > > > u32 save_cfg; > > > u32 save_dscr; > > > struct dma_slave_config dma_sconfig; > > > + struct at_dma_slave atslave; > > > > > > spinlock_t lock; > > > > > > -- > > > 1.7.11.3 > > >