From: Tom Rini Date: Mon, 8 Apr 2013 12:55:55 -0400 Subject: [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support In-Reply-To: <1365178906-22652-1-git-send-email-trini@ti.com> References: <1365178906-22652-1-git-send-email-trini@ti.com> Message-ID: <20130408165555.GC5729@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 05, 2013 at 12:21:43PM -0400, Tom Rini wrote: > Today, the eMMC on the omap5_uevm cannot be booted from, due to a bug in > the save_boot_params function that tests for a range of XIP to MMC2. > But in the case of OMAP5, MMC2 is eMMC boot partition and MMC2_2 is eMMC > (main), and uEVM can only boot from MMC2_2. We cannot just update the > test as-is because other platforms define away MMC2_2 to 0xFF as they > cannot be passed that value. I've fixed this by making it clearer in > the comments what we do, and use a platform definable variable to say > where we must check the range for. This part has been tested on some > relevant platforms for each case. While doing this, the question arose > of how to partition eMMC (since u-boot must be written RAW and not put > on FAT), so I've added GPT support for this. Finally, while in here I > see we weren't using the fallbacks baud rate table, so I changed to > that. This series will mildly conflict (mainly over the rename) with > Sricharan's current series of fixes, so I shall resolve that. With the change to 2/3, applied to u-boot-ti/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: