From: Tom Rini Date: Mon, 8 Apr 2013 16:30:30 -0400 Subject: [U-Boot] offer: program to deal with kirkwood "boot from UART" In-Reply-To: References: Message-ID: <20130408203030.GO5729@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Apr 08, 2013 at 11:14:25AM +0200, JPT wrote: > Hi, > > during my dealing with the bricked kirkwood board I wrote an app > which automates the process of booting from UART. > It's rather stable now, except right now it doesn't work any more. > It's highly configurable, since the external calls to Xmodem and > terminal go to shell scripts. > > Wolfgang, do you want to provide this app somewhere on your site? > > looks like this now: > > $ ./marvellserialboot --mode bb --device /dev/ttyUSB0 --baud 115200 > Waiting for /dev/ttyUSB0: OK > Open /dev/ttyUSB0: OK > Set Parameters to 115200, 8, N, 1, SoftwareFlow: FALSE, > HardwareFlow: FALSE: OK > Clear Recieve Buffer: OK > Sending Command Code BB11223344556677: .0x15 OK. Device is > requesting Xmodem transfer now. > Close /dev/ttyUSB0: OK > Starting Xmodem Upload: > sx -vv -b u-boot-1.1.4-netgear-533ddr3db-uart.bin >/dev/ttyUSB0 > Sende u-boot-1.1.4-netgear-533ddr3db-uart.bin, 12288 Bl?cke:Starten > Sie nun Ihr XMODEM-Empfangsprogramm. > Bytes gesendet:1572992 BPS:9666 > > ?bertragung abgeschlossen > Xmodem Upload successful. > Starting Terminal program: > gtkterm > Terminal program successful. You're probably best just posting the script as a reply here so that the archives pick it up (and search engines). -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: