From: andrew@lunn.ch (Andrew Lunn) Date: Fri, 19 Apr 2013 07:50:54 +0200 Subject: [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller In-Reply-To: <4f4a821bbc61e2da28fd70553fd717ada255097d.1366322287.git.arno@natisbad.org> References: <4f4a821bbc61e2da28fd70553fd717ada255097d.1366322287.git.arno@natisbad.org> Message-ID: <20130419055054.GD18115@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Arnaud > +static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm); > +static DEVICE_ATTR(pwm1_polarity, S_IWUSR | S_IRUGO, > + get_pwm_polarity, set_pwm_polarity); > +static DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, > + get_pwm_mode, set_pwm_mode); > +static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, > + get_speed_control_mode, set_speed_control_mode); > +static DEVICE_ATTR(pwm1_freq, S_IWUSR | S_IRUGO, > + get_pwm_freq, set_pwm_freq); > + > +static DEVICE_ATTR(fan1_input, S_IRUGO, get_fan_rpm, NULL); > +static DEVICE_ATTR(fan1_alarm, S_IRUGO, get_fan_ooc, NULL); > +static DEVICE_ATTR(fan1_alarm_detection, S_IWUSR | S_IRUGO, > + get_fan_ooc_detection, set_fan_ooc_detection); > +static DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan_failure, NULL); > +static DEVICE_ATTR(fan1_fault_detection, S_IWUSR | S_IRUGO, > + get_fan_failure_detection, set_fan_failure_detection); > +static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, > + get_fan_target, set_fan_target); > +static DEVICE_ATTR(fan1_pulses, S_IWUSR | S_IRUGO, > + get_fan_pulses, set_fan_pulses); > +static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, > + get_fan_clk_div, set_fan_clk_div); > +static DEVICE_ATTR(fan1_gear_mode, S_IWUSR | S_IRUGO, > + get_fan_gear_mode, set_fan_gear_mode); > +static DEVICE_ATTR(fan1_startup_voltage, S_IWUSR | S_IRUGO, > + get_fan_startup_voltage, set_fan_startup_voltage); It is normal to use SENSOR_ATTR, not DEVICE_ATTR. Take a look at the existing fan drivers. I also think a lot of these are not needed. They are fixed properties of the board and cannot change dynamically. They are set once using DT and user space does not need to care. Andrew