From: Philip Paeps Date: Fri, 19 Apr 2013 15:00:13 +0200 Subject: [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl In-Reply-To: <1366344655-8535-2-git-send-email-marex@denx.de> References: <1366344655-8535-1-git-send-email-marex@denx.de> <1366344655-8535-2-git-send-email-marex@denx.de> Message-ID: <20130419130013.GA246@twoflower.paeps.cx> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2013-04-19 06:10:51 (+0200), Marek Vasut wrote: > To avoid the old function which are used with the nand_spl/ stuff > getting in the way of NAND SPL framework, the macro > CONFIG_SPL_NAND_LEGACY was introduced and two remaining legacy > boards were adjusted. These board need to be either fixed or > removed in the long run, but I don't have either. It sounds like "fixing" these boards is mainly a matter of confirming that a configuration for them based around CONFIG_SPL_FRAMEWORK will fit in 2K. If so, I don't think there is any reason to keep legacy support around. > +void nand_init(void) {} > +void nand_deselect(void) {} Couldn't you just rename nfc_nand_init() to nand_init()? - Philip -- Philip Paeps Senior Reality Engineer Ministry of Information