From: Tom Rini Date: Mon, 22 Apr 2013 12:02:59 -0400 Subject: [U-Boot] [PATCH 08/14] zynq: Move macros to hardware.h In-Reply-To: <96216a6d01e3687d946f0ba2a8a84814293c8019.1366641836.git.michal.simek@xilinx.com> References: <98a6e4d33e61c56c76b9bd78ef5d8e74ebd1510c.1366641836.git.michal.simek@xilinx.com> <96216a6d01e3687d946f0ba2a8a84814293c8019.1366641836.git.michal.simek@xilinx.com> Message-ID: <20130422160259.GT14952@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Apr 22, 2013 at 04:52:06PM +0200, Michal Simek wrote: > Add all fixed addresses to hardware.h and change petalinux > configuration to support this. > > Signed-off-by: Michal Simek > --- > arch/arm/include/asm/arch-zynq/hardware.h | 2 ++ > board/xilinx/zynq/board.c | 12 +++++++++--- > include/configs/zynq.h | 2 +- > 3 files changed, 12 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h > index bee7b09..e0f6eba 100644 > --- a/arch/arm/include/asm/arch-zynq/hardware.h > +++ b/arch/arm/include/asm/arch-zynq/hardware.h > @@ -27,6 +27,8 @@ > #define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000 > #define XPSS_SCU_BASEADDR 0xF8F00000 > #define CONFIG_SCUTIMER_BASEADDR 0xF8F00600 > +#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 > +#define CONFIG_ZYNQ_GEM_BASEADDR1 0xE000C000 Are these configurable really or no? If they're in they shouldn't be CONFIG named. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: