From: balbi@ti.com (Felipe Balbi) Date: Thu, 25 Apr 2013 12:04:47 +0300 Subject: Multiple issues with omap4 panda es in linux next In-Reply-To: <20130424192330.GC5184@atomide.com> References: <20130419171318.GK10155@atomide.com> <5174F7A8.7070308@ti.com> <20130422180316.GA10155@atomide.com> <5176A45B.5@ti.com> <20130423172353.GD10155@atomide.com> <20130423213151.GM10155@atomide.com> <20130423231605.GO10155@atomide.com> <517770A0.4000609@ti.com> <20130424190821.GB5184@atomide.com> <20130424192330.GC5184@atomide.com> Message-ID: <20130425090447.GK7889@arwen.pp.htv.fi> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Wed, Apr 24, 2013 at 12:23:30PM -0700, Tony Lindgren wrote: > * Tony Lindgren [130424 12:13]: > > * Kishon Vijay Abraham I [130423 22:46]: > > > Hi Tony, > > > > > > On Wednesday 24 April 2013 04:46 AM, Tony Lindgren wrote: > > > >* Tony Lindgren [130423 14:37]: > > > >>* Tony Lindgren [130423 10:28]: > > > >>>* Kishon Vijay Abraham I [130423 08:15]: > > > >>>>>>>2. MUSB fails with legacy booting and DT on panda es > > > >>>>>>> > > > >>>>>>>With both legacy and DT booting I get something like: > > > >>>>>>> > > > >>>>>>>HS USB OTG: no transceiver configured > > > >>>>>>>musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 > > > >>>>>> > > > >>>>>>The dt should work fine with https://patchwork.kernel.org/patch/2423061/. > > > >>>>> > > > >>>>>OK thanks for checking that. > > > > > > > >Kishon, I think there's also some other issue remaining > > > >in linux next with MUSB and DT. I'm still getting the > > > >"HS USB OTG: no transceiver configured" although the nop > > > >xceiv is compiled in. Maybe give it a try against linux > > > >next? > > > > > > For OMAP4 MUSB, you'll need omap-usb2 phy. I've attached my .config. > > > > Thanks your config helped me to track it down. Looks like I got > > the PHYs the wrong way around between EHCI and MUSB.. > > > > In any case, I did have omap-usb2 compiled in, but I did not have > > OMAP_OCP2SCP=y set. Should OMAP_USB2 depend on that? > > > > Also, looks like MUSB just sits in b_idle mode though, so no more > > ID pin interrupt for some reason. > > OK looks like I got the ID interrupt going by enabling > CONFIG_TWL6030_USB=y. Still stays in a_idle with no keyboard > after plugging it in, but now changes between a and b mode. come again, you ground ID pin and have no devices attached ? Then it should stay in a_idle. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: