From: Tom Rini Date: Mon, 29 Apr 2013 16:21:26 -0400 Subject: [U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset In-Reply-To: <1364451882-6518-1-git-send-email-lokeshvutla@ti.com> References: <1364451882-6518-1-git-send-email-lokeshvutla@ti.com> Message-ID: <20130429202126.GC25397@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Mar 27, 2013 at 08:24:42PM -0000, Lokesh Vutla wrote: > EMIF supports a global warm reset mode, during which the > EMIF keeps the SDRAM content. But if leveling is enabled > at the time of warm reset for DDR3, the following steps > needs to be done after warm reset: > 1) Keep EMIF in self refresh mode. > 2) Reset PHY to bring back the PHY to a known state. > 3) Start Levelling procedure. > Doing the same. > And also enabling DLL lock and code output after warm reset. > > Tested on OMAP5432 ES2.0 > > Signed-off-by: Lokesh Vutla Applied to u-boot-ti/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: