From: tony@atomide.com (Tony Lindgren) Date: Wed, 8 May 2013 15:23:21 -0700 Subject: [PATCH] ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices In-Reply-To: <1367427597-30060-1-git-send-email-aaro.koskinen@iki.fi> References: <1367427597-30060-1-git-send-email-aaro.koskinen@iki.fi> Message-ID: <20130508222320.GL32546@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Aaro Koskinen [130501 10:06]: > Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) > broke the SPI display/panel driver probe on RX-51/N900. The exact cause is > not fully understood, but it seems to be related to the probe order. SPI > communication to the panel driver (spi1.2) fails unless the touchscreen > (spi1.0) has been probed/initialized before. When the omap2-mcspi driver > was converted to a platform driver, it resulted in that the devices are > probed immediately after the board registers them in the order they are > listed in the board file. > > Fix the issue by moving the touchscreen before the panel in the SPI > device list. > > The patch fixes the following failure: > > [ 1.260955] acx565akm spi1.2: invalid display ID > [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error > [ 1.273071] omapdss CORE error: driver probe failed: -19 Thanks for updating the description, applying into omap-for-v3.10/fixes. Regards, Tony