From: andrew@lunn.ch (Andrew Lunn) Date: Tue, 21 May 2013 07:11:32 +0200 Subject: [PATCH V3 09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug In-Reply-To: <1369090911-1479-10-git-send-email-gmbnomis@gmail.com> References: <1369090911-1479-1-git-send-email-gmbnomis@gmail.com> <1369090911-1479-10-git-send-email-gmbnomis@gmail.com> Message-ID: <20130521051132.GJ26249@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, May 21, 2013 at 01:01:50AM +0200, Simon Baatz wrote: > Signed-off-by: Simon Baatz > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi | 97 +++++++++++++++++++++ > arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 40 +++++++++ > arch/arm/boot/dts/kirkwood-sheevaplug.dts | 45 ++++++++++ > 4 files changed, 184 insertions(+) > create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi > create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts > create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b9f7121..e81a387 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -84,6 +84,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ > kirkwood-ns2max.dtb \ > kirkwood-ns2mini.dtb \ > kirkwood-nsa310.dtb \ > + kirkwood-sheevaplug.dtb \ > + kirkwood-sheevaplug-esata.dtb \ > kirkwood-topkick.dtb \ > kirkwood-ts219-6281.dtb \ > kirkwood-ts219-6282.dtb \ > diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi > new file mode 100644 > index 0000000..9d59475 > --- /dev/null > +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi > @@ -0,0 +1,97 @@ > +/* > + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs > + * > + * Copyright (C) 2013 Simon Baatz > + * > + * Licensed under GPLv2 > + */ > + > +/include/ "kirkwood.dtsi" > +/include/ "kirkwood-6281.dtsi" > + > +/ { > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x20000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS0,115200n8 earlyprintk"; > + }; > + > + ocp at f1000000 { > + pinctrl: pinctrl at 10000 { > + > + pmx_usb_power_enable: pmx-usb-power-enable { > + marvell,pins = "mpp29"; > + marvell,function = "gpio"; > + }; > + pmx_led_red: pmx-led-red { > + marvell,pins = "mpp46"; > + marvell,function = "gpio"; > + }; > + pmx_led_blue: pmx-led-blue { > + marvell,pins = "mpp49"; > + marvell,function = "gpio"; > + }; > + pmx_sdio_cd: pmx-sdio-cd { > + marvell,pins = "mpp44"; > + marvell,function = "gpio"; > + }; > + pmx_sdio_wp: pmx-sdio-wp { > + marvell,pins = "mpp47"; > + marvell,function = "gpio"; > + }; > + }; > + serial at 12000 { > + status = "okay"; > + }; > + > + nand at 3000000 { > + status = "okay"; > + > + partition at 0 { > + label = "u-boot"; > + reg = <0x0000000 0x100000>; > + }; > + > + partition at 100000 { > + label = "uImage"; > + reg = <0x0100000 0x400000>; > + }; > + > + partition at 500000 { > + label = "root"; > + reg = <0x0500000 0x1fb00000>; > + }; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + usb_power: regulator at 1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "USB Power"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + regulator-always-on; > + regulator-boot-on; > + gpio = <&gpio0 29 0>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + > + health { > + label = "sheevaplug:blue:health"; > + gpios = <&gpio1 17 1>; > + linux,default-trigger = "default-on"; > + }; > + }; > +}; > diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts > new file mode 100644 > index 0000000..1c6946a > --- /dev/null > +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts > @@ -0,0 +1,40 @@ > +/* > + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug > + * > + * Copyright (C) 2013 Simon Baatz > + * > + * Licensed under GPLv2 > + */ > + > +/dts-v1/; > + > +/include/ "kirkwood-sheevaplug-common.dtsi" > + > +/ { > + model = "Globalscale Technologies eSATA SheevaPlug"; > + compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; > + > + ocp at f1000000 { > + pinctrl: pinctrl at 10000 { > + > + pinctrl-0 = < &pmx_nand &pmx_uart0 > + &pmx_usb_power_enable > + &pmx_led_blue>; > + pinctrl-names = "default"; > + > + }; > + > + sata at 80000 { > + status = "okay"; > + nr-ports = <2>; > + }; > + > + mvsdio at 90000 { > + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; > + pinctrl-names = "default"; > + status = "okay"; > + cd-gpios = <&gpio1 12 1>; > + wp-gpios = <&gpio1 15 0>; > + }; > + }; > +}; > diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts > new file mode 100644 > index 0000000..f7684066 > --- /dev/null > +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts > @@ -0,0 +1,45 @@ > +/* > + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug > + * > + * Copyright (C) 2013 Simon Baatz > + * > + * Licensed under GPLv2 > + */ > + > +/dts-v1/; > + > +/include/ "kirkwood-sheevaplug-common.dtsi" > + > +/ { > + model = "Globalscale Technologies SheevaPlug"; > + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; > + > + ocp at f1000000 { > + pinctrl: pinctrl at 10000 { > + > + pinctrl-0 = < &pmx_nand &pmx_uart0 > + &pmx_usb_power_enable > + &pmx_led_red > + &pmx_led_blue>; > + pinctrl-names = "default"; > + > + }; > + > + mvsdio at 90000 { > + pinctrl-0 = <&pmx_sdio>; > + pinctrl-names = "default"; > + status = "okay"; > + /* No CD or WP GPIOs */ > + broken-cd; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + > + misc { > + label = "sheevaplug:red:misc"; > + gpios = <&gpio1 14 1>; > + }; > + }; > +}; > -- > 1.7.9.5 > Hi Simon Looks good Acked-by: Andrew Lunn