From: mpa@pengutronix.de (Markus Pargmann) Date: Sun, 7 Jul 2013 12:22:07 +0200 Subject: [PATCH] ARM: dts: imx27 phyCARD-S remove wrong I2C RTC In-Reply-To: <1373100718.107651915@f159.i.mail.ru> References: <1372782469.486055292@f129.mail.ru> <1373031909-16178-1-git-send-email-mpa@pengutronix.de> <1373100718.107651915@f159.i.mail.ru> Message-ID: <20130707102207.GI16871@s25.your-server.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Jul 06, 2013 at 12:51:58PM +0400, Alexander Shiyan wrote: > > Fixup of commit 7874d595b78e431f0f661d2fe47625649308a52e > > "ARM: dts: Add device tree support for phycard pca100". > > > > Remove wrong I2C RTC node. > > > > Signed-off-by: Markus Pargmann > > --- > > > > Thanks, Alexander, you are right. I2C2 has no RTC. > ... > > There are a couple of comments on this file. > > I think that the OWIRE should be moved to the RDK. I moved OWIRE and i2c1 to RDK. Both are not used on the SOM. > ioexpander must contain "gpio-controller" at least, and for use it further, > it is necessary to define the label for this node. I checked all I2C devices in the board schematics. There is actually no ioexpander. I don't know why it was added. I will send some I2C patches later. Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |