Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Richard Zhao , Stephen Warren , Lucas Stach , Mark Brown Subject: [ 12/99] ASoC: tegra: correct playback_dma_data setup Date: Fri, 2 Aug 2013 18:07:25 +0800 Message-Id: <20130802100227.307930136@linuxfoundation.org> In-Reply-To: <20130802100225.478715166@linuxfoundation.org> References: <20130802100225.478715166@linuxfoundation.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Richard Zhao commit 647ab784c507763bfda79155f125b6edd1244806 upstream. The errors were caused by copy/paste mistake in below commit since v3.10: 3489d50 ASoC: tegra: Use common DAI DMA data struct It also corrects slave_id initialization in tegra20_ac97 driver. Signed-off-by: Richard Zhao Acked-by: Stephen Warren Acked-by: Lucas Stach Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- sound/soc/tegra/tegra20_ac97.c | 6 +++--- sound/soc/tegra/tegra20_spdif.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) --- a/sound/soc/tegra/tegra20_ac97.c +++ b/sound/soc/tegra/tegra20_ac97.c @@ -399,9 +399,9 @@ static int tegra20_ac97_platform_probe(s ac97->capture_dma_data.slave_id = of_dma[1]; ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1; - ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - ac97->capture_dma_data.maxburst = 4; - ac97->capture_dma_data.slave_id = of_dma[0]; + ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ac97->playback_dma_data.maxburst = 4; + ac97->playback_dma_data.slave_id = of_dma[1]; ret = snd_soc_register_component(&pdev->dev, &tegra20_ac97_component, &tegra20_ac97_dai, 1); --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -323,8 +323,8 @@ static int tegra20_spdif_platform_probe( } spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT; - spdif->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - spdif->capture_dma_data.maxburst = 4; + spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + spdif->playback_dma_data.maxburst = 4; spdif->playback_dma_data.slave_id = dmareq->start; pm_runtime_enable(&pdev->dev);