From: Guenter Roeck Date: Thu, 29 Aug 2013 15:28:31 +0000 Subject: Re: [lm-sensors] sht15 kernel driver Message-Id: <20130829152831.GA25021@roeck-us.net> List-Id: References: <521E7CA7.5060407@snapithd.com> <87fvtt4dmt.fsf@jerows.sfl> <521EBD9F.7070502@snapithd.com> <87ppswh75z.fsf@jerows.sfl> In-Reply-To: <87ppswh75z.fsf@jerows.sfl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jerome Oufella Cc: Chris Rodley , kernel@savoirfairelinux.com, linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org On Thu, Aug 29, 2013 at 11:02:16AM -0400, Jerome Oufella wrote: > Chris Rodley writes: > > > Thanks Jerome! > > > > That was just what I needed to know. > > The device is now set up and is working well - I will have a go at > > back porting now. > > > > Many thanks again for your help! > > Chris > > Good to know Chris! > > Note, we noticed that the sht15 driver may be sensible to noisy lines, > we suspect a race condition around the interrupt handling code. > Any proposed fixes ? Guenter > If your sensor is populated on the board you shouldn't have problems > though. > > Jerome > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors