From: Tom Rini Date: Thu, 29 Aug 2013 12:06:11 -0400 Subject: [U-Boot] [PATCH v3 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver In-Reply-To: <1377773805-8751-1-git-send-email-pekon@ti.com> References: <1377773805-8751-1-git-send-email-pekon@ti.com> Message-ID: <20130829160611.GT17898@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Aug 29, 2013 at 04:26:40PM +0530, Pekon Gupta wrote: > *changes in v3* > [PATCH 1/5] (complete change) > - ecc-scheme is selection is controller by s/w, not CONFIG_NAND_xx > - added omap_select_ecc_scheme(), as common function to handle all > ecc-scheme related configurations for both board_nand_init() & > omap_nand_switch_ecc(). > - removed un-used defines from asm/arch-am33xx/omap_gpmc.h > - updated doc/REAME.nand > [PATCH 2/5] removed un-used defines from asm/omap_gpmc.h > [PATCH 3/5] removed omap_calculate_ecc_bch_sw() and omap_calculate_ecc() > and merged their logic into omap_calculate_ecc_bch() > [PATCH 4/5] updated return error-code in-case of invalid conditions > [PATCH 5/5] (new) for board/ti/am335x/README Note that with the series applied, we see: NAND: nand: selected OMAP_ECC_BCH8_CODE_HW 256 MiB I think we should move the selected message to a debug(). That said, I'm seeing a nice performance increase, both with and without the dcache patch also applied, so yay! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: