From: Wolfgang Denk Date: Wed, 04 Sep 2013 17:36:13 +0200 Subject: [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07 In-Reply-To: <005001cea968$9eaa58e0$dbff0aa0$@amanomcgann.com> References: <002b01cea8e7$b14fc5b0$13ef5110$@amanomcgann.com> <20130903224528.02CB1380DDB@gemini.denx.de> <005001cea968$9eaa58e0$dbff0aa0$@amanomcgann.com> Message-ID: <20130904153613.803F6380AE5@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Chuck, please always keep the mailing list on Cc: And please don't top post / full quote. Thanks. In message <005001cea968$9eaa58e0$dbff0aa0$@amanomcgann.com> you wrote: > > Thank you for the reply! Yes the same loadaddr is used for both tftp > and fatload as follows: loadaddr=0x21000000 OK. > I'm not sure what you mean by a complete console log so a little > direction would be helpful so I can provide what you are asking for. I Please copy all input and all output of your system into a file and include this with your posting. For example, you coul use the "script" command, or your terminal emulator may have a logging feature, or you could simply use copy & paste. > can tell you when I run the commands manually I get the same result each > time. I have attached a txt file that shows what happens when I run the > command. At the bottom of the file I included the environment > variables. If you look at the variable usbgetrootfs this is the command > being run. I cannot see any such attachment. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de When the bosses talk about improving productivity, they are never talking about themselves.