From: broonie@kernel.org (Mark Brown) Date: Wed, 11 Sep 2013 16:35:47 +0100 Subject: [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful In-Reply-To: <20130911072955.GG11227@lee--X1> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> <1378817379-8238-28-git-send-email-lee.jones@linaro.org> <43055af7-991f-4122-b308-a3dcddbbb72a@email.android.com> <20130911071053.GD11227@lee--X1> <52301963.5030006@metafoo.de> <20130911072955.GG11227@lee--X1> Message-ID: <20130911153547.GU29403@sirena.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Sep 11, 2013 at 08:29:55AM +0100, Lee Jones wrote: > Only if you print out every regulator, clock, GPIO pin and things of > this nature. Key hardware blocks such as; SD, Flash, USB, Eth, HDMI, > Audio, UART, GPIO and I2C controllers and Sensors I think deserve a > one line "I'm here and working" message. The usual rule people apply with this stuff is if the driver has read back information it can display from the hardware (eg, a revision) then that's OK. Things that are likely to crash the system if they fail tend to also be OK (this is why the regualtor API is quite chatty for example, a lot of the things it does can cause an immediate crash). -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: