From: Simon Horman Date: Wed, 25 Sep 2013 04:59:26 +0000 Subject: Re: [PATCH 0/3] Lager i2c bus support Message-Id: <20130925045926.GE24243@verge.net.au> List-Id: References: <1378813194-19493-1-git-send-email-ulrich.hecht@gmail.com> In-Reply-To: <1378813194-19493-1-git-send-email-ulrich.hecht@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Thu, Sep 19, 2013 at 02:28:20PM -0700, Simon Horman wrote: > On Mon, Sep 16, 2013 at 03:23:46PM +0200, Ulrich Hecht wrote: > > On Thu, Sep 12, 2013 at 3:51 PM, Guennadi Liakhovetski > > wrote: > > Apologies for me excessively slow response. > > > > What is your preferred way to resolve this? We can choose one of the > > > following: > > > > > > 1. merge the two i2c clock patches into one - feel free to take my code > > > into "ARM: shmobile: r8a7790: add the I2C bus clock" from this series > > > > > > 2. port one of the patches on top of the other one - if this series isn't > > > going to be modified again, I can port my patch on top of it. > > > > Since my DU stuff will have to be ported to DT anyway and I have found > > that my work towards that on the rcar-i2c driver is virtually > > identical to what Guennadi has already posted, I'd suggest to go with > > his version. > > That sounds like a good resolution to me. Btw, as far as I can see the current status of this work is as follows. 1. Awaiting Ack from Laurent on "pinctrl: sh-pfc: r8a7790: add pin definitions for the I2C3 interface" by Guennadi. This patch is targeted at Linus Walleji's tree. 2. Once Linus has queued up that patch I will queue up "ARM: shmobile: r8a7790: add I2C support in Device Tree mode" in the renesas tree. 3. From there I think you should be able to repost the parts of your series that aren't included in Guennadi's work. To be clear: I have marked this series as "Changes Requested" in patchwork and it is will not be on my radar unless it is re-posted in some form.