From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Thu, 3 Oct 2013 08:21:53 +0100 Subject: [PATCH v2] ARM: bcm: Add DEBUG_LL console support In-Reply-To: <1379462711-6957-1-git-send-email-csd@broadcom.com> References: <1379462711-6957-1-git-send-email-csd@broadcom.com> Message-ID: <20131003072153.GE12758@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Sep 17, 2013 at 05:05:11PM -0700, Christian Daudt wrote: > @@ -980,6 +991,7 @@ config DEBUG_UART_PHYS > default 0xffd82340 if ARCH_IOP13XX > default 0xfff36000 if DEBUG_HIGHBANK_UART > default 0xfffff700 if ARCH_IOP33X > + default 0x3e000000 if DEBUG_BCM_KONA_UART Please take a moment to think about this. > depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ > DEBUG_UART_8250 || DEBUG_UART_PL01X > > @@ -1035,6 +1047,7 @@ config DEBUG_UART_VIRT > default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN > default 0xfefff700 if ARCH_IOP33X > default 0xff003000 if DEBUG_U300_UART > + default 0xfe300000 if DEBUG_BCM_KONA_UART And this. In particular, study the list which you are adding to and see whether you can spot what you're doing wrong. Thanks.