From: Lukasz Majewski Date: Fri, 04 Oct 2013 10:42:00 +0200 Subject: [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() In-Reply-To: <1380864994-24525-1-git-send-email-hs@denx.de> References: <1380864994-24525-1-git-send-email-hs@denx.de> Message-ID: <20131004104200.5c75b41c@amdc308.digital.local> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heiko, > check first, if we are on the bus, we want to enable. If so, > return immediately, do not calc max adapter number, nor check > other things. > > Signed-off-by: Heiko Schocher > Cc: Lukasz Majewski > --- > drivers/i2c/i2c_core.c | 18 ++++++++++-------- > 1 file changed, 10 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c > index d1072e8..170423a 100644 > --- a/drivers/i2c/i2c_core.c > +++ b/drivers/i2c/i2c_core.c > @@ -278,20 +278,22 @@ unsigned int i2c_get_bus_num(void) > */ > int i2c_set_bus_num(unsigned int bus) > { > - int max = ll_entry_count(struct i2c_adapter, i2c); > + int max; > + > + if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0)) > + return 0; > > - if (I2C_ADAPTER(bus) >= max) { > - printf("Error, wrong i2c adapter %d max %d > possible\n", > - I2C_ADAPTER(bus), max); > - return -2; > - } > #ifndef CONFIG_SYS_I2C_DIRECT_BUS > if (bus >= CONFIG_SYS_NUM_I2C_BUSES) > return -1; > #endif > > - if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0)) > - return 0; > + max = ll_entry_count(struct i2c_adapter, i2c); > + if (I2C_ADAPTER(bus) >= max) { > + printf("Error, wrong i2c adapter %d max %d > possible\n", Since you are the maintainer of the i2c code, you will decide if those changes shall be applied (they are really cosmetic) :-). My suggestion: printf -> error() macro @ common.h > + I2C_ADAPTER(bus), max); > + return -2; I've noticed that i2c_core uses -1/-2 return values for errors globaly. So for a new code we could start using defines from errno.h (-2 -> -ENODEV) ? > + } > > #ifndef CONFIG_SYS_I2C_DIRECT_BUS > i2c_mux_disconnet_all(); -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group