From: grant.likely@secretlab.ca (Grant Likely) Date: Mon, 11 Nov 2013 15:30:02 +0000 Subject: [PATCH] phy: Add MOXA RTL8201CP PHY support In-Reply-To: References: <1383317673-14704-1-git-send-email-jonas.jensen@gmail.com> Message-ID: <20131111153002.722CCC4191F@trevor.secretlab.ca> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, 4 Nov 2013 09:51:24 -0800, Florian Fainelli wrote: > 2013/11/4 Jonas Jensen : > > This is why I ended up setting PHY_IGNORE_INTERRUPT and the comment > > about its effectiveness. Polling works but the extra reads on the bus > > seem unnecessary. > > Ideas how they can be eliminated are appreciated. > > As of today, the only way to work around it is not to use > of_mdiobus_register() and use mdiobus_register() directly which will > allow you to properly describe such a configuration. of_mdiobus_register() can be changed. One option: If the caller knows what it wants to happen in the case of no interrupt, then it can be added as an argument to of_mdiobus_register(). No need to work around this in an ugly way. Is setting the irq to PHY_POLL something that should be done for the entire bus, or only for a handful of PHYs? g.