From: Tom Rini Date: Tue, 12 Nov 2013 09:52:15 -0500 Subject: [U-Boot] [U-Boot, v3, 1/5] bootcount: store bootcount var in environment In-Reply-To: <1383570303-26750-2-git-send-email-hs@denx.de> References: <1383570303-26750-2-git-send-email-hs@denx.de> Message-ID: <20131112145215.GK420@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Nov 04, 2013 at 02:04:59PM +0100, Heiko Schocher wrote: > If no softreset save registers are found on the hardware > "bootcount" is stored in the environment. To prevent a > saveenv on all reboots, the environment variable > "upgrade_available" is introduced. If "upgrade_available" is > 0, "bootcount" is always 0 therefore no need to save the > environment on u-boot boot, if "upgrade_available" is 1 "bootcount" > is incremented in the environment and environment gets written > on u-boot start. > So the Userspace Applikation must set the "upgrade_available" > and "bootcount" variable to 0 (for example with fw_setenv), > if a boot was successfully. > > Signed-off-by: Heiko Schocher Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: