From: horms@verge.net.au (Simon Horman) Date: Thu, 14 Nov 2013 14:22:06 +0900 Subject: [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D In-Reply-To: <20131113230345.21482.36997.sendpatchset@w520> References: <20131113230345.21482.36997.sendpatchset@w520> Message-ID: <20131114052204.GD22870@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Nov 14, 2013 at 08:03:45AM +0900, Magnus Damm wrote: > From: Magnus Damm > > Use the gpio-keys driver to support the 4 pins on the > dip switch DSW2 which is mounted on the KZM9D board. > > Signed-off-by: Magnus Damm Hi Magnus, I have tried enabling the following on a config produced using the kzm9d_defconfig: CONFIG_INPUT_KEYBOARD CONFIG_INPUT_EVDEV CONFIG_KEYBOARD_GPIO But all I see so far in dmsg is: # dmesg | grep gpio platform gpio_keys.3: Driver gpio-keys requests probe deferral I was expecting something more along the lines of: input: gpio-keys as /devices/platform/gpio-keys/input/input0 Could you give me some guidance on how to test this? > --- > > arch/arm/boot/dts/emev2-kzm9d.dts | 39 ++++++++++++++++++++++++++++++++++++- > arch/arm/boot/dts/emev2.dtsi | 2 - > 2 files changed, 39 insertions(+), 2 deletions(-) > > --- 0001/arch/arm/boot/dts/emev2-kzm9d.dts > +++ work/arch/arm/boot/dts/emev2-kzm9d.dts 2013-11-13 20:21:27.000000000 +0900 > @@ -9,7 +9,9 @@ > */ > /dts-v1/; > > -/include/ "emev2.dtsi" > +#include "emev2.dtsi" > +#include > +#include > > / { > model = "EMEV2 KZM9D Board"; > @@ -54,4 +56,39 @@ > vddvario-supply = <®_1p8v>; > vdd33a-supply = <®_3p3v>; > }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + button at 1 { > + debounce_interval = <50>; > + wakeup = <1>; > + label = "DSW2-1"; > + linux,code = ; > + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; > + }; > + button at 2 { > + debounce_interval = <50>; > + wakeup = <1>; > + label = "DSW2-2"; > + linux,code = ; > + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; > + }; > + button at 3 { > + debounce_interval = <50>; > + wakeup = <1>; > + label = "DSW2-3"; > + linux,code = ; > + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; > + }; > + button at 4 { > + debounce_interval = <50>; > + wakeup = <1>; > + label = "DSW2-4"; > + linux,code = ; > + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; > + }; > + }; > }; > --- 0001/arch/arm/boot/dts/emev2.dtsi > +++ work/arch/arm/boot/dts/emev2.dtsi 2013-11-13 20:20:03.000000000 +0900 > @@ -8,7 +8,7 @@ > * kind, whether express or implied. > */ > > -/include/ "skeleton.dtsi" > +#include "skeleton.dtsi" > > / { > compatible = "renesas,emev2"; >