From: tony@atomide.com (Tony Lindgren) Date: Thu, 21 Nov 2013 08:58:23 -0800 Subject: [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx In-Reply-To: <1385041804-19115-2-git-send-email-balajitk@ti.com> References: <1385041804-19115-1-git-send-email-balajitk@ti.com> <1385041804-19115-2-git-send-email-balajitk@ti.com> Message-ID: <20131121165823.GM10317@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Balaji T K [131121 05:51]: > pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core > and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. > > Fix the following error message: > pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) > pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x > > SDIO card is not detected after moving pin mux to omap4_pmx_core since > sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. Cool, does this fix the issue with the WLAN not coming up after a warm reset on panda? Regards, Tony