From: marex@denx.de (Marek Vasut) Date: Fri, 29 Nov 2013 17:44:06 +0100 Subject: [PATCH 0/3] serial: mxs-auart: flush_buffer hook and interrupt processing In-Reply-To: <1385742927-11358-1-git-send-email-hector.palacios@digi.com> References: <1385742927-11358-1-git-send-email-hector.palacios@digi.com> Message-ID: <201311291744.06943.marex@denx.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Hector, > Hello, > > This series implement several fixes to the mxs-auart serial driver. > > The first patch implements the flush_buffer hook. Currently the driver > can be shut down and pending data in the FIFO will be lost. > > The second patchs adds a check of the BUSY flag in the tx_empty hook > to make sure the UART is not about to fill data into the FIFO. > > The third patch moves the interrupt handling from the ISR out to a > tasklet. This was motivated due to different transmission problems > with hardware and software flow control at high baudrates whereby > transmission was interrupted or data lost. > The problem can be reproduced by setting two AUARTs at 576000/N/8 > with CRTSCTS and sending a large file from one port to the other > with 'cat'. 57600 is not that high of a baudrate. Or do you really mean 576000 (576 thousand) ? Best regards, Marek Vasut