From: jason@lakedaemon.net (Jason Cooper) Date: Thu, 19 Dec 2013 22:21:15 -0500 Subject: [PATCH 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy. In-Reply-To: <1387311713-1926-1-git-send-email-andrew@lunn.ch> References: <1387311713-1926-1-git-send-email-andrew@lunn.ch> Message-ID: <20131220032115.GD2609@titan.lakedaemon.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Dec 17, 2013 at 09:21:49PM +0100, Andrew Lunn wrote: > Describe the binding for the Marvell MVEBU SATA phy. This driver > can be used at least with Kirkwood, Dove and maybe others. > Additionally, update the SATA binding with the properties to link > to the phy nodes. > > Signed-off-by: Andrew Lunn > --- > v1->v2: > Correct #phy-cells > Correct number after @ to match first reg address. > Rename to phy-mvebu.txt > > v2->v3: > Renamed to mvebu-phy.txt > Use "port0", "port1" instead of "0", "1" > --- > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ > .../devicetree/bindings/phy/mvebu-phy.txt | 22 ++++++++++++++++++++++ > 2 files changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt Acked-by: Jason Cooper thx, Jason.